Knoxville Epoxy Floor Pros installs warehouse epoxy flooring across Knoxville, TN for 3PL operators, wholesalers and self-storage owners who need a slab that stays clean, bright and easy to read from a forklift seat. Bare concrete sheds dust onto stored goods and soaks up hydraulic leaks, which is usually what gets a manager to pick up the phone.
So far this year our crews have finished 41 warehouse floors, from a 3PL building in Hardin Valley to a beverage distributor off Strawberry Plains Pike. A typical warehouse job covers:
Most warehouse floors run $3.50 to $8 per sq ft, and a 10,000 sq ft section can usually be finished over one weekend with forklifts rolling on it again by Tuesday.

A food distributor in Maryville had a 6,500 sq ft cooler where condensation kept the bare slab damp and pallet jacks left black streaks down every aisle. We dried the slab with dehumidifiers, laid a moisture-tolerant primer and finished it with a cold-cure epoxy and a light quartz texture for grip.
The cooler was emptied over Labor Day weekend, and product was back on the racks Tuesday morning.
Cost: $41,600 for 6,500 sq ft
Timeframe: 3 days

A building supply company in Mascot was fighting concrete dust that settled on drywall and boxed fixtures before they ever shipped. Our crew ground the 24,000 sq ft slab in four sections, patched spalled joints and rolled out a light gray epoxy with yellow forklift lanes and white walkways.
Night shifts kept the contractor counter open every day, and the dust problem ended with the very first section.
Cost: $84,000 for 24,000 sq ft
Timeframe: 8 nights

A climate-controlled self-storage building in Lenoir City had painted hallways peeling under hand trucks and rolling carts. We stripped the old paint, ground 9,800 sq ft of corridors and installed a medium gray epoxy with a matte topcoat that hides scuffs and won't glare under the hallway lights.
Every unit stayed reachable the whole time because crews worked one hallway at a time behind barricades.
Cost: $39,200 for 9,800 sq ft
Timeframe: 5 days
WAREHOUSE SYSTEMS WE INSTALL

01 · WAREHOUSE SYSTEM
Forklift aisles take the worst beating in any warehouse, with hard poly wheels pivoting on the same spots every shift. Those lanes get a thicker wear layer than the storage bays, built up with an extra body coat before the topcoat goes on.
Rack legs and dock plates get attention too, since point loads crack thin coatings first. The lanes end up keeping their color long after paint would have worn down to bare concrete.

02 · WAREHOUSE SYSTEM
Most failed warehouse floors we get called to fix were never prepped right the first time. Prep starts with diamond grinding to open the slab, then a moisture test so nothing traps vapor under the coating.
Spalled joints, pop-outs and old sealer are all dealt with before any epoxy goes down. That extra day of prep is what keeps the new floor from peeling under pallet jacks and hand trucks a year or two later.

03 · WAREHOUSE SYSTEM
Dock doors let in rain, road salt and grit all winter, so the first 30 feet inside a distribution center wears out faster than anywhere else. Knoxville Epoxy Floor Pros adds a textured topcoat in that zone for grip when the floor gets wet.
Staging lanes, pick zones and bay numbers can also be marked right into the coating. Clear markings help new pickers find their way on day one and keep pallets out of the forklift path.

04 · WAREHOUSE SYSTEM
Cooler and freezer warehouses put floors through condensation, frozen pallets and constant forklift traffic at low temperatures. These spaces get a urethane cement or cold-cure system that bonds and stays flexible well below freezing.
Work is scheduled in zones so product can move into a finished section while the next one is prepped. A textured topcoat helps forklifts and pickers keep their footing when frost and moisture build up.

05 · WAREHOUSE SYSTEM
Clear floor markings keep forklifts, pickers and visitors in their own lanes and cut down on near misses. Aisle lines, pallet zones, pedestrian walkways and OSHA color codes are coated right into the epoxy system with durable urethane.
Coated lines last far longer than painted ones and are easy to keep clean with a scrubber. Restriping and layout changes can be handled on weekends when a warehouse is reorganized.

06 · WAREHOUSE SYSTEM
Even a well-built warehouse floor wears thin in the busiest lanes after a few years of traffic. A recoat screens the existing system, repairs worn spots and lays down a fresh topcoat without the cost of a full tear-out.
Knoxville Epoxy Floor Pros can set up a recoat schedule for high-traffic aisles so the floor never wears through to bare concrete. Most recoats are done overnight or over a weekend so shipping stays on schedule.
WHY WAREHOUSE MANAGERS CHOOSE US
Warehouse floors are judged on how they handle traffic, dust and downtime, and these are the reasons managers keep calling us back for the next building.
01
Light gray and white finishes bounce more light off the floor, so pickers can read labels without new fixtures.
02
A rack installer we trust unbolts, moves and re-anchors pallet racking so the coating runs under every footprint.
03
A crew lead walks the floor each spring and touches up any lane wear at no charge.
04
Chipped dock edges and failed joints are rebuilt with epoxy mortar as part of the quote, not as a surprise add-on.
05
A crew lead certified as an ICRI Concrete Slab Moisture Testing Technician checks every slab before a system is chosen.
06
Every coating system carries a written limited warranty against peeling and delamination.

Foot traffic can usually return within 24 hours, and forklifts within about 72 hours depending on temperature and coating build. Fast-cure topcoats shorten that window, which is why most busy warehouses around the city book their installs over a weekend.
Not always. Plenty of jobs coat the open aisles first and leave loaded racks in place, then come back for the rack footprints during a slower season. If full coverage matters more, racking can be moved one section at a time.
Yes, and that's one of the biggest reasons warehouses coat their floors. Once the slab is sealed, the fine dust that settles on boxes, shelving and equipment stops coming up off the concrete.
Yes. We photograph and measure your current lanes, walkways and pallet zones before grinding, then lay them back down in the same spots or update them if your flow has changed.
It can be, as long as the system is chosen for the temperature. Coolers usually get a moisture-tolerant primer with a cold-cure epoxy, while freezers below zero often need a urethane cement system instead.
Most warehouse floors go 7 to 12 years before the forklift lanes need a fresh topcoat. Storage bays and walkways tend to last much longer since they see very little wheel traffic.

WHAT HAPPENS AFTER YOU CALL
01 Free on-site estimate
Usually booked within 2 business days of your call.
02 Itemized written quote
Grinding, repairs, materials and labor are listed line by line.
03 Quick start dates
Most installs begin within 2 weeks of signing.
04 Furniture moving and cleanup
Both included, so the space is ready to use when the crew leaves.
05 Local to East Tennessee
Serving Knox, Blount, Anderson and Loudon counties.
Get a FREE Quote
Rated #1 Epoxy Floor Installer in Knoxville, 2026