Knoxville Epoxy Floor Pros installs retail & showroom epoxy flooring for Knoxville, TN boutiques, car dealerships and furniture galleries where the floor is part of the sales pitch. Shoppers notice a dull, stained slab before they notice the merchandise, so a showroom floor has to look sharp under bright lights and still shrug off carts, tire marks and dropped displays. Showroom floors we install can include:
So far this year our crews have finished 31 storefronts and showrooms, including a boutique on Gay Street and a boat dealership near Fort Loudoun Lake. Most retail jobs are scheduled after closing or around a holiday reset, so the doors still open on time the next morning.
Retail and showroom floors typically run $6 to $15 per sq ft depending on the finish, and an average 2,000 sq ft store is done in 3 to 4 nights.

A car dealership on Parkside Drive had a 4,800 sq ft showroom of cracked vinyl tile that showed every tire mark. We pulled the tile, ground the slab and poured a charcoal and silver metallic epoxy, then sealed it with a urethane topcoat built to resist hot tires and plasticizer stains.
Vehicles were rolled out to the lot each evening and parked back inside before the sales team arrived.
Cost: $52,800 for 4,800 sq ft
Timeframe: 5 nights

A furniture gallery in Sevierville had worn carpet tiles across a 6,200 sq ft showroom, and they made brand new sofas look tired. Our crew pulled the carpet, ground off the glue and installed a warm greige epoxy with a satin topcoat that keeps glare off fabric and wood finishes.
Furniture was shifted one room set at a time, and the store stayed open every day of the project.
Cost: $43,400 for 6,200 sq ft
Timeframe: 6 nights

A hair salon in Fourth and Gill sold styling products up front and kept fighting dye stains on its sealed concrete. We ground out the old sealer and stains, then installed a white and gray flake epoxy with a chemical-resistant topcoat that wipes clean after every color appointment.
The salon closed on a Sunday and Monday, and the first clients were back in the chairs Tuesday morning.
Cost: $6,300 for 900 sq ft
Timeframe: 2 days
RETAIL SYSTEMS WE INSTALL

01 · RETAIL SYSTEM
Most stores can't shut down for a week, so retail jobs are planned around trading hours and done in sections. Fixtures move one zone at a time, the slab is diamond ground and patched, and the coating goes down while the rest of the shop keeps selling.
A seamless floor has no grout lines to trap grit tracked in from the street or sticky spills from the coffee bar. Staff can dust mop at closing and run an auto scrubber once a week to keep it looking fresh.

02 · RETAIL SYSTEM
Showrooms for cars, boats, furniture and appliances need a floor that looks sharp under bright lights and still carries heavy loads. A high-build epoxy base under a clear urethane topcoat gives that deep shine without softening under warm tires.
Knoxville Epoxy Floor Pros tests sample boards under your own lighting before the pour, since gloss reads differently under LEDs than in daylight. Showrooms that rotate inventory often may lean toward a satin finish that hides tire scuffs between cleanings.

03 · RETAIL SYSTEM
Brand colors, inlaid logos and quartz blends turn a plain slab into part of the store design. Borders, walkway stripes and department color zones can all be laid out in one install, which beats floor decals that peel within a few months.
Quartz and flake finishes suit boutiques and salons that want texture and a little grip near the entrance. Solid colors with a metallic accent lane work well in showrooms that want to steer shoppers toward feature displays.

04 · RETAIL SYSTEM
Dealership floors deal with hot tires, brake dust and the occasional fluid leak, all under lighting that shows every flaw. A high-build epoxy base with a hot-tire rated urethane topcoat keeps the showroom glossy and the service lane easy to clean.
The service drive usually gets a light grit so wet tires and customers stay steady at the write-up desk. Most dealership jobs are split into phases, so vehicles never have to leave the lot for long.

05 · RETAIL SYSTEM
A logo in the entry or colored lanes that walk shoppers toward the checkout can do more than a hanging sign. Stencils are cut from your own artwork, then the colors are poured into the epoxy so the design sits under the topcoat instead of on top of it.
Floor graphics built this way will not peel, lift at the edges or wear off under foot traffic the way vinyl decals do. Department color zones and aisle markers can be added in the same install to save a second trip.

06 · RETAIL SYSTEM
A tired retail floor does not always need a full tear-out. When the base coat is still bonded, the crew screens the surface, repairs worn traffic lanes and lays a fresh topcoat that brings back the shine.
Recoats are usually scheduled overnight or between a Saturday close and Monday open, so the doors never have to stay shut. Knoxville Epoxy Floor Pros can also set up a recoat schedule for high-traffic stores that want the floor to look new year after year.
WHY STORE OWNERS CHOOSE US
A store floor has to sell and survive at the same time, and these are the reasons owners trust us with theirs.
01
Racks, displays and fixtures are covered or moved section by section, then set back exactly where they were.
02
Color chips are matched to your brand guide, and logos are laid in with stencils cut from your own artwork.
03
Finishes are tested under your store lights so the gloss level never washes out products or causes glare.
04
Every store gets a cleaning guide and the right pH-neutral cleaner so staff can keep the shine without dulling it.
05
Most commercial installs are scheduled overnight or between Friday close and Monday open, so the doors stay open.
06
Every coating system carries a written limited warranty against peeling and delamination.
Most stores close for 2 to 3 days. Bigger spaces can be split into sections and done over nights or weekends, so part of the floor stays open while the rest cures.
Yes. Your logo is cut into a stencil from the original artwork, poured in your brand colors and sealed under the clear topcoat so it won't wear off with foot traffic.
Yes, when the system is built for it. A thick epoxy base with a urethane topcoat resists hot tire pickup, and cars can usually roll back onto the floor after about 72 hours.
A high gloss can get slick when it's wet or dusty. A fine anti-slip additive in the topcoat adds grip near entrances and wash areas without dulling the shine shoppers see.
Just the square footage, a few photos of the current floor and your preferred install dates. A free on-site visit then checks slab condition and moisture before the written quote is sent.
Dust mop daily and clean with a pH-neutral cleaner in an auto scrubber or soft mop. Walk-off mats at the doors catch grit, and a fresh topcoat every few years brings back full gloss.

WHAT HAPPENS AFTER YOU CALL
01 Free on-site estimate
Usually booked within 2 business days of your call.
02 Itemized written quote
Grinding, repairs, materials and labor are listed line by line.
03 Quick start dates
Most installs begin within 2 weeks of signing.
04 Furniture moving and cleanup
Both included, so the space is ready to use when the crew leaves.
05 Local to East Tennessee
Serving Knox, Blount, Anderson and Loudon counties.
Get a FREE Quote
Rated #1 Epoxy Floor Installer in Knoxville, 2026