Knoxville Epoxy Floor Pros turns tired, dusty concrete into a sealed, glossy surface through professional epoxy floor installation in Knoxville, TN. A 2-part resin system is bonded to a ground slab, leaving a seamless floor that shrugs off oil drips, hot tires, chemicals and heavy foot traffic. Every installation includes:
Knoxville's humid summers and nearly 48 inches of yearly rain keep moisture moving up through older slabs, which is why a store-bought kit rarely makes it past the second summer. Our crews have finished 168 floors in 2026, from 2-car garages in Farragut to a 12,000 sq ft distribution warehouse off Alcoa Highway, and not one has come back to us for peeling.
Solid color systems start around $3 to $7 per sq ft, with metallic floors running $9 to $15. A 30% deposit locks in the install date, the balance is due after the final walkthrough, and foot traffic can usually return within 24 to 48 hours.


This 1950s basement in Sequoyah Hills had a painted slab that kept flaking, plus a damp corner that tested well above safe moisture levels. Our crew ground off the old paint, filled 2 hairline cracks and rolled out an epoxy moisture vapor barrier before pouring a charcoal and silver metallic finish.
The owners now use the space as a media room, and the floor reflects the lights like polished stone.
Cost: $7,400 for 650 sq ft
Timeframe: 4 days


A Powell homeowner split a detached 720 sq ft shop between woodworking benches and a squat rack, and the bare concrete was soaking up sawdust, oil and chalk. After diamond grinding the slab, we laid a gray base coat, broadcast a full blend of tan and black flakes and sealed it under a polyaspartic topcoat.
Dropped plates and rolling tool chests haven't left a mark since, and sweeping up sawdust takes minutes.
Cost: $5,200 for 720 sq ft
Timeframe: 3 days


A taproom in Knoxville's Old City needed a floor that could handle spilled beer, wet boots and weekend crowds without turning slick. Knoxville Epoxy Floor Pros installed a solid color epoxy system with slip-resistant aggregate across 1,400 sq ft and coved the edges 4 inches up the walls so spills never reach the drywall.
The work ran over a Sunday and Monday while the bar was closed, so the doors opened Tuesday as usual.
Cost: $8,100 for 1,400 sq ft
Timeframe: 2 days
WHAT WE INSTALL
WHY CHOOSE US
01
General liability and workers' comp cover every job, and copies of both certificates come attached to the written estimate.
02
Our installers have been coating slabs since 2012, from 1920s basements in Fourth and Gill to brand new builds out in Hardin Valley.
03
A crew lead certified as an ICRI Concrete Slab Moisture Testing Technician checks every slab before a coating system is chosen.
04
Each member of the crew holds OSHA 10 or OSHA 30 construction training, which matters when grinders and resins are running inside a working business.
05
The number on the estimate is the number on the invoice unless more square footage gets added or the system changes mid-job.
06
Every coating system carries a written limited warranty against peeling and delamination, so the floor is backed long after the crew packs up.
Epoxy floor installation in Knoxville usually runs $3 to $15 per square foot, so a 500 sq ft basement lands somewhere between $1,500 and $7,500 depending on the system. A fixed written price comes after the room is measured and the slab is checked in person.
Most residential installs are done within 2 to 4 days, including grinding, repairs and curing time between coats. Light foot traffic can usually return after 24 hours, while furniture and heavier use wait about 72 hours.
In most cases, yes. Hairline cracks and small spalls get filled with a polyurea repair material during prep, so they won't show through the finished coating. Slabs that are heaving or badly broken need concrete repair first, and our crew will tell you straight if that's the case.
Moisture is the top reason epoxy floors fail, which is why every slab gets tested before a system is picked. When readings come back high, a moisture vapor barrier primer goes down first to keep the coating from bubbling or lifting later on.
A smooth, high-gloss epoxy can get slick once water hits it. Mixing aluminum oxide grit into the topcoat or going with a flake system fixes that without making the floor any harder to clean.
A professionally installed epoxy floor typically lasts 10 to 20 years in a home and 5 to 10 years in a busy commercial space. Refreshing the topcoat every few years keeps the shine up and stretches that lifespan even further.

WHAT HAPPENS AFTER YOU CALL
01 Free on-site estimate
Usually booked within 2 business days of your call.
02 Itemized written quote
Grinding, repairs, materials and labor are listed line by line.
03 Quick start dates
Most installs begin within 2 weeks of signing.
04 Furniture moving and cleanup
Both included, so the space is ready to use when the crew leaves.
05 Local to East Tennessee
Serving Knox, Blount, Anderson and Loudon counties.
Get a FREE Quote
Rated #1 Epoxy Floor Installer in Knoxville, 2026