Knoxville Epoxy Floor Pros pours metallic epoxy flooring for Knoxville, TN homeowners and businesses who want a floor that looks like polished marble, molten copper or ocean water instead of plain gray concrete. Every metallic floor is worked by hand while the resin is still wet, so no two swirls ever come out the same. Metallic floors we pour can include:
So far this year our crews have poured 46 metallic floors, from a basement bar in Rocky Hill to a lake house kitchen near Tellico Village. Each project starts with a sample board mixed in your colors, so the look is approved before a single batch is opened.
Metallic epoxy usually runs $9 to $15 per sq ft, and most rooms are poured over 3 days, with light foot traffic after 24 hours and furniture back in after 4 days.

A family in West Hills wanted their unfinished basement turned into a game room and bar, but the slab had hairline cracks and a musty carpet pad on top. We pulled the carpet, filled the cracks, laid a moisture vapor barrier and poured an onyx and silver metallic epoxy that looks like polished stone under the bar lights.
Furniture went back in four days later, just in time for the first watch party that Saturday.
Cost: $9,600 for 800 sq ft
Timeframe: 4 days

A coffee shop in Seymour had stained, worn concrete that never looked clean no matter how often it was mopped. Our crew ground the 1,200 sq ft slab, patched the old spalls and poured a copper and bronze metallic epoxy under a clear urethane topcoat that handles spilled lattes and chair legs.
The shop closed for three days, and regulars kept stopping by the window to watch the pour.
Cost: $15,600 for 1,200 sq ft
Timeframe: 3 days

An Island Home homeowner had a sunroom with cracked ceramic tile and grout that was always dirty. We removed the tile and thinset, ground the slab and poured a blue and white ocean wave metallic epoxy, then sealed it with a UV-stable topcoat so the color won't yellow in the afternoon sun.
The whole room was finished in three days, and the furniture went back in that weekend.
Cost: $5,400 for 400 sq ft
Timeframe: 3 days
METALLIC SYSTEMS WE INSTALL
01 · METALLIC SYSTEM
Metallic floors are poured rather than just rolled, so the slab has to be ground flat and every crack filled before color goes down. A tinted primer and a solid base coat come first, giving the metallic layer an even backdrop to move across.
The pigmented resin is then spread and worked by hand with rollers, brushes and air blowers while it stays wet. That window lasts about 30 minutes, so the crew plans the pattern room by room before a single kit is mixed.
02 · METALLIC SYSTEM
A glossy metallic floor draws the eye in a car showroom, boutique or salon, and it bounces display lighting around in a way plain concrete never will. Darker blends like onyx and charcoal hide scuffs from rolling racks better than pale pearl tones.
Retail floors usually get a satin urethane topcoat to cut glare and dust marks between cleanings. Knoxville Epoxy Floor Pros can phase the work over nights or a long weekend so the doors stay open during the week.
03 · METALLIC SYSTEM
Every metallic floor is built in layers, starting with a primer and base coat, then the metallic coat and a clear protective finish. Skipping any one of them is how floors end up cloudy, soft or peeling a year later.
The topcoat gets chosen by how the room is used. Aliphatic urethane stands up to chair legs and pet claws in kitchens and basements, while a fine grit in the clear coat adds traction near entry doors and bar areas.
04 · METALLIC SYSTEM
Basements are where metallic epoxy really earns its keep, turning a plain concrete slab into something that looks like poured stone. Every basement gets a moisture test and a vapor barrier primer first, because East Tennessee slabs tend to push dampness up from below.
Home bars, game rooms and theater rooms usually go with darker blends like onyx, charcoal and pewter that hide scuffs under low lighting. Most basement floors are done in 3 to 4 days, with furniture back in place by the end of the week.
05 · METALLIC SYSTEM
A metallic garage floor brings a showroom look to the space where you park, work and store your tools. The base and metallic coats are finished with a hot-tire rated urethane, so the shine holds up to warm tires and the road salt that rolls in every winter.
A light grit can be added near the entry door and around the vehicles for safer footing when the floor is wet. Garage metallics usually take 3 days, and the car can come back inside after about 72 hours.
06 · METALLIC SYSTEM
No two metallic floors look alike, which is a big part of the appeal. Crews can blend two or three pigments to create marble veining, a lava flow pattern or a soft ocean swirl that moves across the room.
Knoxville Epoxy Floor Pros pours sample boards in your chosen colors so you can see them under your own lighting before anything is mixed. Accent borders and color changes between rooms can be planned during the same visit.
WHY HOMEOWNERS CHOOSE US
01
Pigment blends are mixed on small panels first, so the swirl, depth and tone are approved before any resin is opened on site.
02
The same installers handle metallic work week after week, which matters with a coating that has to be shaped in a short window.
03
Slabs are tested for vapor emissions, and basements with high readings get a barrier primer so the finish doesn’t haze or lift.
04
A satin or gloss urethane clear coat is picked based on sunlight, foot traffic and pets instead of one product for every floor.
05
The person who measures your floor works on the crew that grinds it, so the same faces stay from the first visit to the final walkthrough.
06
Every coating system carries a written limited warranty against peeling and delamination.
Most metallic floors in Knoxville run $9 to $15 per sq ft. Heavy grinding, tile removal and custom pigment blends push the price up, while a clean, flat slab keeps it near the low end.
Wood is not a good base for metallic epoxy. Tile is usually pulled up along with the thinset, then the concrete underneath is ground and patched so the pour stays level and bonds properly.
A high-gloss finish can be slick when wet, especially in socks. A fine grit or a satin topcoat adds grip in kitchens, entries and bar areas without hiding the metallic look.
Yes, in most cases. Pigments are blended on sample boards until they match a cabinet, countertop or paint chip you supply, and the board is signed off before the pour.
Dust mop daily so grit doesn't scratch the gloss, and put felt pads under chair legs. Wash with a pH-neutral cleaner, and a fresh urethane topcoat every few years brings back the shine.

WHAT HAPPENS AFTER YOU CALL
01 Free on-site estimate
Usually booked within 2 business days of your call.
02 Itemized written quote
Grinding, repairs, materials and labor are listed line by line.
03 Quick start dates
Most installs begin within 2 weeks of signing.
04 Furniture moving and cleanup
Both included, so the space is ready to use when the crew leaves.
05 Local to East Tennessee
Serving Knox, Blount, Anderson and Loudon counties.
Get a FREE Quote
Rated #1 Epoxy Floor Installer in Knoxville, 2026