SINCE 2016 · 1,900+ FLOORS COATED · WRITTEN WARRANTY
Started in March 2016 with one rented grinder and a two-car garage in South Knoxville. Today a crew of 14 has coated 1,900+ floors across Knox, Blount, Anderson and Loudon counties: flake with a polyaspartic topcoat for garages, metallic for basements and home bars, urethane cement for commercial kitchens.
Most two-car garages run $1,600 to $3,600. Commercial systems run about $4 to $12 per sq ft.
A 30% deposit holds your date. The balance is due only after the final walkthrough.
Estimates booked within 2 business days. Most garages finished in 2 to 3 days, polyaspartic often in 1.
Most jobs start within 2 weeks. Businesses can book nights or weekends.
Every slab is diamond ground, patched and moisture tested. Lead installers have 3+ years on the grinder.
Every coating system carries a written limited warranty against peeling and delamination.
Tell us about your floor, and we'll follow up with a free written estimate.
#1 Rated Epoxy Floor Installer in Knoxville, 2026
Floors Coated Since 2016
Sq Ft on Our Largest Single Floor
Years on East Tennessee Concrete
Counties Served in East Tennessee
A grinding test patch and a moisture reading happen during the free visit, not on install day. About 1 in 4 Knoxville slabs we check needs a vapor barrier, and it’s far better to know that before the price is set.
Flake, quartz and metallic samples come to the walkthrough on full-size boards, so colors get judged under your own lights instead of on a phone screen. Most people end up changing their first pick once they see it at home.
The number on the written quote is the number on the invoice unless the square footage or system changes. Moving shelving, cove base and crack repair are all spelled out line by line, so nothing shows up as a surprise later.
If anything looks off after the floor cures, a crew lead comes out within one business day to take a look at no charge. Most of these visits turn out to be a quick cleaning tip, but you never have to chase anyone down.

Commercial epoxy is the workhorse system for retail stores, offices, showrooms and medical suites, giving them a seamless floor that hides scuffs and cleans fast. Most jobs get 2 to 3 coats over a ground slab, from primer to a clear topcoat matched to the traffic. A boutique near West Town Mall had its sales floor done between a Saturday close and Monday open, so not a single business day was lost.

Industrial floors are where cheap coatings go to die. Forklifts, pallet jacks and dropped parts call for high-build epoxy at 20 mils or more, and the largest single job so far was a 64,000 sq ft distribution floor finished over four weekends. Safety striping and aisle markings get laid in the same visit, so the plant reopens ready to run.

Urethane cement is the pick when a floor sees boiling water, steam cleaning or freezer temperatures. Commercial kitchens and food plants lean on it, and we suggest it over epoxy any time hot washdowns are part of the daily routine. It handles thermal shock, so a spilled stockpot or open cooler door won’t crack it the way plain epoxy can.

Quartz epoxy is what we suggest when a floor has to look sharp and stay grippy while wet, which is why it suits restaurant kitchens, locker rooms and school restrooms. Colored quartz is broadcast in layers and sealed with a clear topcoat, building texture into the floor itself. Unlike tile, there are no grout lines for grease to hide in.

Self-leveling epoxy is poured rather than rolled, so it flows over cracks and low spots and settles into a flat, glossy surface. Crews use it in showrooms, office buildings and light commercial spaces, and it doubles as a base under decorative finishes. The flattest pour so far went under a row of display cases at a jewelry store on Kingston Pike, where even a slight dip would have shown in the glass.

Chemical-resistant flooring starts with one question: what actually spills on this floor? Auto shops, labs, battery rooms and manufacturing plants each deal with different solvents, acids and cleaners, so the resin system is chosen to match that list. Put a generic coating under the wrong chemical and it can soften or lift within months, which makes this step cheap insurance.

East Tennessee's Prep-First Epoxy Floor Contractor
Epoxy flooring in Knoxville typically costs $3 to $15 per square foot installed, depending on the coating system, the size of the floor and the condition of the concrete. Knoxville Epoxy Floor Pros gives an exact price after measuring the space and inspecting the slab.
Coating system | Typical installed cost | What affects the price |
|---|---|---|
Garage flake epoxy | $1,600 to $3,600 per two-car garage | Garage size, crack and joint repair, flake blend and topcoat |
Solid color epoxy | $3 to $7 per sq ft | Slab condition, number of coats and color choice |
Metallic epoxy | $9 to $15 per sq ft | Pigment blend, prep for a flat pour and the topcoat |
Quartz and anti-slip systems | $6 to $12 per sq ft | Grit level, broadcast layers and cove base |
Urethane cement and chemical-resistant | $7 to $15 per sq ft | Build thickness, chemicals on site and drain work |
Smaller floors cost more per foot because the grinder, the crew and the material minimums don’t shrink with the room. In 2025 the average two-car garage came in right around $2,700, and a fixed written price follows a free on-site estimate.
Six steps, no shortcuts. Here’s how a typical job runs from the first visit to the day you park on it.
We start by looking at the concrete in person and asking how the space gets used. That visit is where we spot cracks, old coatings, and moisture issues before putting together a written estimate.
We grind the concrete mechanically to remove old coatings, sealers, and surface contamination, which gives the coating a clean, open surface to bond to.
We fill cracks, patch pitting, and treat oil staining. We also test the slab's moisture levels, since trapped moisture can cause coatings to fail later.
We apply a primer matched to your slab's condition to seal the concrete and improve adhesion for the coats that follow.
We roll or spray the base epoxy layer evenly across the floor. For flake systems, we broadcast the flake into the wet base coat at this stage.
We finish with a topcoat, often polyaspartic or urethane, for added durability and UV resistance, and the floor stays closed to foot and vehicle traffic until it has fully cured.
That first garage in South Knoxville was only a few miles from the shop, and the map has filled in a lot since then. These days the crew covers homes, shops and commercial buildings across Knox, Blount, Anderson and Loudon counties. Not sure if your address is inside the lines? Call or text and you’ll have an answer in a minute.
Homeowners and business owners across Knox, Blount, Anderson and Loudon counties on what it was like to work with the crew.
“The crew showed up right when they said they would and answered every question we had before we signed off on the job.”
Chemical-Resistant Flooring Customer

“Two years in and our garage floor still looks brand new. No peeling, and not a single hot tire mark.”
Metallic Epoxy Flooring Customer

“We really liked knowing exactly what was going on at every step, from grinding the concrete all the way to the final topcoat.”

“We appreciated how carefully the team prepared the concrete and explained each stage of the installation. The new epoxy floor looks clean, feels durable, and is much easier to maintain.”

We install garage floor coatings, commercial floor coatings, and concrete coatings for basements, patios, porches, and workshops. We also repair and recoat failing epoxy floors.
Yes, garage floor coatings are one of our core services in Knoxville, TN, usually as a flake epoxy system with a polyaspartic topcoat.
Yes, we coat retail stores, restaurants, offices, warehouses, and auto shops, with the system matched to each facility's traffic and chemical exposure.
We install epoxy, flake, metallic, quartz, polyaspartic, polyurea, and urethane cement systems, depending on how the floor will be used.
Most residential garage installations take 2 to 3 days, including prep, coating, and cure time between layers.
Most projects run $3 to $15 per square foot depending on the floor size, concrete condition, and coating system, and most 2-car garages land between $1,600 and $3,600. We give you an exact price after an on-site inspection.
Yes, we provide free written estimates after measuring the space and inspecting the concrete.
Yes, we find the cause first, then either patch the damaged area or remove the coating and recoat the floor, depending on how far the failure has spread.
A properly installed epoxy floor commonly lasts 10 to 20 years under normal residential use, while heavy commercial traffic may call for recoating sooner.
Free Estimates · Written Price in 2 Business Days · Knox, Blount, Anderson and Loudon Counties
Tired of looking at that stained slab? Knoxville Epoxy Floor Pros will measure the space, test the concrete and hand you a written price, usually within 2 business days.