Knoxville Epoxy Floor Pros coats more home garages than any other kind of floor, and most of them start out the same way, with oil drips, road salt stains and a peeling DIY kit. Garage floor epoxy coating replaces all of that with a bonded, multi-layer finish that shrugs off hot tires, dropped tools and East Tennessee winters. Every garage system can include:
So far in 2026 our crews have coated 94 garages, from new builds in Corryton to 1970s ranch homes in Karns that had never been sealed. The most common request is a gray and black flake that hides dirt between washes.
A typical 2-car garage runs $1,600 to $3,600 depending on slab condition and the system you pick. Foot traffic can return the next morning, and cars can park again after 72 hours.

A Karns homeowner had rolled on a store-bought epoxy kit three years earlier, and hot tires had already peeled it off in two long strips. Our crew ground away every trace of the old coating, filled the cracked control joints and broadcast a full gray and black flake over a fresh epoxy base.
Two winters of road salt later, the floor still wipes clean with a hose and a squeegee.
Cost: $3,400 for 480 sq ft
Timeframe: 2 days

A South Knoxville family with two kids and no spare parking spot needed their garage back the same weekend. We ground out the tire stains Saturday morning, broadcast a light gray flake into the base coat and sealed it under a fast-cure polyaspartic topcoat that was dry to walk on by dinner.
Both cars were back inside Monday morning, and the speckled finish now hides the dirt the kids track in from the yard.
Cost: $2,900 for 440 sq ft
Timeframe: 1 day

A three-car garage in Halls Crossroads doubled as a woodshop, and years of road salt had left the slab pitted and flaking near the doors. Our team rebuilt the spalled sections with epoxy mortar, then installed a light gray solid-color system with yellow striping around the workbench area.
The owner says sawdust and dropped screws are now easy to find, and the floor brightened the space more than new lighting did.
Cost: $4,950 for 690 sq ft
Timeframe: 3 days
GARAGE SYSTEMS WE INSTALL
01 · GARAGE SYSTEM
Busy households that can't give up the garage for a weekend usually go with one-day polyaspartic garage coatings. The resin cures in hours instead of days and stays clear even where afternoon sun hits the floor.
Our crew grinds, patches and coats the slab in a single visit, so most families can walk on it that evening. Cars pull back in after about 24 hours.
02 · GARAGE SYSTEM
Decorative flake garage floor coatings are the go-to in Knoxville because the speckled finish hides dust, salt residue and small slab flaws. Vinyl chips are broadcast into a wet epoxy base until the surface is fully covered.
We seal the flake under a clear topcoat with a light texture that keeps wet tires and boots from sliding. A sweep and hose-down is all it needs.
03 · GARAGE SYSTEM
Workshops and home gyms often look sharper with a solid-color epoxy garage floor in light gray or tan. The bright, even surface bounces overhead light around and makes dropped screws easy to spot.
Knoxville Epoxy Floor Pros adds fine anti-slip grit to the topcoat on request. Our team can also stripe parking spots or a work zone in a contrasting color.
04 · GARAGE SYSTEM
A metallic garage floor gives the space a showroom look, with swirls of pearl and color that catch the light when the door opens. The pigments are worked by hand while the resin is wet, so every floor ends up one of a kind.
A hot-tire rated urethane topcoat protects the finish from tire marks and road salt. Most metallic garages take about 3 days, and a fine grit can be added for better footing on wet days.
05 · GARAGE SYSTEM
Peeling kits, hot-tire pickup and chipped patches are some of the most common calls from Knoxville homeowners. The failed coating is ground off, cracks and spalls are rebuilt with epoxy mortar and a new system goes down over sound concrete.
When an older coating is still well bonded, a screen and fresh topcoat may be all it needs. Either way, the floor is tested and the options are explained before any work is quoted.
06 · GARAGE SYSTEM
Garages that double as workshops or home gyms need a floor that can take dropped tools, rolling toolboxes and heavy weights. These floors get a thicker high-build base with a full flake broadcast that hides scuffs and keeps its grip.
Knoxville Epoxy Floor Pros can add contrasting work zones, safety lines or a darker blend under benches where oil and grease tend to land. Rubber gym mats sit right on top without staining the coating.
WHY HOMEOWNERS CHOOSE US

01
Old oil and tire marks are degreased before grinding so the new coating never lifts around them.
02
Flake and solid-color chips are dropped off ahead of time so the blend can be checked under your own garage lights.
03
Every topcoat is rated for road salt and freeze-thaw cycles, so the finish holds up after snowy commutes on I-40.
04
Every residential garage system carries a written limited warranty that specifically covers hot-tire pickup.
05
Polyaspartic systems are ground, patched and coated in a single visit, and cars pull back in after about 24 hours.
06
A crew lead certified as an ICRI Concrete Slab Moisture Testing Technician checks every slab before a system is chosen.
Garage floor epoxy coating in Knoxville typically costs $1,600 to $3,600 for a standard 2-car garage, depending on slab repairs and the system chosen. Knoxville Epoxy Floor Pros gives a fixed written price after looking at the concrete in person.
Most store-bought kits are thin, water-based epoxy rolled over a slab that was only acid-etched or swept. Without diamond grinding, the coating never bonds deeply enough, and hot tires pull it up within a year or two.
Foot traffic is fine the next morning on most systems. Cars should wait about 72 hours on standard epoxy, or roughly 24 hours with a polyaspartic topcoat.
Yes it can be. A smooth, glossy coat can get slick when wet. A flake broadcast or fine anti-slip grit in the topcoat adds enough texture to keep tires and boots planted.
Hairline cracks and spalls are filled before coating, and a full flake broadcast hides most of what remains. Deep oil stains are degreased first so the new coating bonds properly instead of lifting.
Sweep or dust mop weekly and rinse with water and a pH-neutral cleaner when needed. Avoid citrus or acidic cleaners, which can dull the topcoat over time.

WHAT HAPPENS AFTER YOU CALL
01 Free on-site estimate
Usually booked within 2 business days of your call.
02 Itemized written quote
Grinding, repairs, materials and labor are listed line by line.
03 Quick start dates
Most installs begin within 2 weeks of signing.
04 Furniture moving and cleanup
Both included, so the space is ready to use when the crew leaves.
05 Local to East Tennessee
Serving Knox, Blount, Anderson and Loudon counties.
Get a FREE Quote
Rated #1 Epoxy Floor Installer in Knoxville, 2026