Epoxy Flooring Installation in Seymour, TN

Knoxville Epoxy Floor Pros has coated more than 70 floors in Seymour, TN, a community that sits right between Knoxville and Sevierville along Chapman Highway. Garages, basements and shop floors here are quoted on site for free, with a moisture test, a crack check and color samples included in every visit. Estimates are usually booked within the same week, and most garages are finished in 1 to 2 days. The same crew lead stays with each job from the first grind to the final topcoat.

RECENT LOCAL PROJECTS

Recent Epoxy Floor Projects Completed in Seymour, TN

01

Polyaspartic Garage Floor installed on Simmons Rd, Seymour, TN 37865

A family off Simmons Road had a two-car garage with a dusty, unsealed slab that tracked grit into the house every day. Knoxville Epoxy Floor Pros ground the concrete, filled a few shrinkage cracks and broadcast a gray and white flake under a clear polyaspartic topcoat. Both cars were parked inside the next morning, and the floor now sweeps clean in minutes. The owners say it was the easiest upgrade since they moved in. Kids now ride scooters on it when it rains.

Turnaround: 1 day

Price: $3,050 (520 sq ft)

02

Epoxy Basement Floor installed on Burnett Station Rd, Seymour, TN 37865

A basement off Burnett Station Road had a damp corner, old carpet glue and a slab that felt cold year round. After a moisture test, the crew ground off the glue, rolled a vapor-blocking primer and finished with a gray flake epoxy and a satin topcoat. The owners turned the space into a dry family room with a big sectional and a TV wall. The damp corner has stayed dry through two wet springs since. A dehumidifier keeps the room comfortable all summer.

Turnaround: 3 days

Price: $4,600 (650 sq ft)

03

Commercial Epoxy Floor installed at a tire shop on Chapman Hwy, Seymour, TN 37865

A tire and alignment shop on Chapman Highway had rubber marks, oil and brake dust ground deep into the concrete in all three bays. The slab was shot-blasted, cracks around the lifts were rebuilt and a gray chemical-resistant epoxy went down with aluminum oxide grit for traction. The install ran over a weekend, so customers never had to wait on a closed bay. The owner says cleanup at closing now takes half the time. Yellow lines now mark each lift zone.

Turnaround: 3 days over a weekend

Price: $8,900 (1,300 sq ft)

WHAT WE OFFER

Epoxy Flooring and Concrete Coating Services in Seymour, TN

01

Garage Floor Coatings

Garages around Seymour take red clay, road salt and hot tires from daily drives up and down Chapman Highway. A flake system over a full diamond grind holds up to that wear, hides dust between cleanings and gives a light texture that stays grippy when wet. Chip blends can be matched to brick, siding or cabinets, and samples come to every estimate so colors can be checked in real daylight. Older garages near Pitner Road often need extra crack repair first, while newer slabs usually just need a good grind. Many Seymour garages double as a workshop, gym or storage space for mowers and side-by-sides. A thicker base coat handles that extra weight, and painted lines can mark where each machine parks so the space stays organized.

02

Concrete Floor Finishing

Not every floor needs a full color system. Grinding, crack repair and a clear sealer or solid color coat can turn a dusty slab in a laundry room, storage shed or utility space into a clean, easy-to-sweep surface. Spalled steps, worn edges and the strip under the garage door are rebuilt at the same time. Each repair is listed as its own line on the quote, so owners see exactly what the slab needs before work starts. Covered porches and patios can get the same treatment with a textured finish that stays safe in the rain. Old paint and failing sealers are ground off first so the new coat bonds properly and lasts for years without peeling or fading.

03

Polyaspartic Flooring

Polyaspartic cures much faster than standard epoxy, so most two-car garages are back in use by the next morning. It also holds its color in direct sun, which helps garages and porches that stay open through long summer afternoons. Knoxville Epoxy Floor Pros often pairs an epoxy base with a polyaspartic topcoat, so the floor gets both strength and UV resistance. Light foot traffic is usually fine within a few hours of the final coat. Busy families in Seymour often pick polyaspartic because the whole job fits into one day off work. Cold weather is not a problem either, since heaters keep the slab at the right temperature during winter installs.

AFTER THE INSTALL

Basements, Shops and Floor Care in Seymour

01

Basements and Utility Spaces

Basements in the rolling hills around Seymour can pull moisture from the soil after heavy rain. Every basement gets a moisture test first, then a vapor-blocking primer when readings run high, followed by a solid color, quartz or metallic finish.

A dust mop and a damp mop with a pH-neutral cleaner handle most upkeep. Bleach and citrus cleaners are best skipped, and a dehumidifier helps any basement coating last longer. Window wells and sump pits get extra sealing at the edges, and any leftover moisture spots are checked again during recoat visits. Finished basements around Seymour often become playrooms, home offices or guest rooms. Most basement jobs take 2 to 3 days. Furniture can go back in after about 2 days.

02

Commercial Shops and Workplaces

Repair shops, small offices and stores along Chapman Highway need floors that look clean and stand up to fluids, carts and daily cleaning. Knoxville Epoxy Floor Pros installs chemical-resistant and decorative systems with weekend and overnight scheduling.

Every commercial quote lists expected downtime in hours, and painted safety lines can mark lift zones and walkways. After years of use, a light sanding and a fresh topcoat bring the shine back in a single day. Shops that cannot close at all can have the floor coated in sections, one bay at a time. Cove bases are added where floors are washed down often, so water cannot creep under the edges. Spot tests are run first where solvents are used.

Schedule a Free Epoxy Floor Estimate in Seymour, TN

An installer from Knoxville Epoxy Floor Pros will measure the space, test for moisture and bring flake, quartz and metallic samples to homes and shops in Seymour, Kodak and South Knoxville. We also install epoxy floors in nearby Pigeon Forge, TN.

A line-item quote is emailed the same day, and Saturday visits are available. Businesses can book weekend installs so the work never interrupts a weekday. Call (555) 555-5555 or send the form to pick a time that works.

WHAT HAPPENS AFTER YOU CALL

What to Expect From Our Crew

01 Free on-site estimate

Usually booked within 2 business days of your call.

02 Itemized written quote

Grinding, repairs, materials and labor are listed line by line.

03 Quick start dates

Most installs begin within 2 weeks of signing.

04 Furniture moving and cleanup

Both included, so the space is ready to use when the crew leaves.

05 Local to East Tennessee

Serving Knox, Blount, Anderson and Loudon counties.

Get a FREE Quote

Rated #1 Epoxy Floor Installer in Knoxville, 2026