Knoxville Epoxy Floor Pros has poured 29 self-leveling epoxy flooring systems, from loft condos in the Old City to a home studio in Sequoyah Hills. The resin flows out to a glassy, seamless finish about 1/8 to 3/16 inch thick, which hides minor slab texture and leaves no grout lines to catch dirt.
Clients in Dandridge and Mechanicsville often pick self-leveling for spaces where looks matter as much as toughness, such as studios, clinics and finished basements. Color chips and a small poured sample come along to the estimate so the gloss can be judged in the room’s own light.

A physical therapy clinic in Turkey Creek wanted to replace worn carpet tiles with a floor that could be disinfected between patients. We removed the carpet and glue, ground 2,100 sq ft of slab, patched low spots with epoxy mortar and poured a light gray self-leveling epoxy with a satin urethane topcoat.
The clinic moved appointments to its second location for one long weekend and reopened on Tuesday morning.
Cost: $21,000 for 2,100 sq ft
Timeframe: 4 days

A converted loft near Sevier Avenue in South Knoxville had an old slab with patched trenches and paint drips from the previous tenant. Knoxville Epoxy Floor Pros ground the surface flat, filled the trenches and poured 1,300 sq ft of charcoal self-leveling epoxy that now runs through the kitchen and living space.
The owners stayed with family for four nights while the floor cured, and the furniture went back in on day five.
Cost: $11,700 for 1,300 sq ft
Timeframe: 4 days

An electronics assembly shop in Kodak needed a smooth floor that would not shed dust or build static around its workbenches. The crew shot-blasted 3,200 sq ft, laid copper grounding strips and poured a conductive self-leveling epoxy that was tested for resistance before handoff.
Work was split into two halves, so one assembly line stayed running the whole week.
Cost: $38,400 for 3,200 sq ft
Timeframe: 6 days
SELF-LEVELING SYSTEMS WE INSTALL

01 · SELF-LEVELING SYSTEM
Self-leveling resin is poured in ribbons and spread with a gauge rake set to the exact thickness. A spiked roller follows right behind to pop air bubbles before the epoxy starts to set.
Temperature matters more here than with thinner coatings, so heaters or fans are set up the day before. That keeps the flow even and the finish free of ripples or soft spots.

02 · SELF-LEVELING SYSTEM
Food plants, pharma rooms and electronics shops like this system because the surface has no pores or seams for dust and bacteria to settle in. A 3/16 inch pour also handles carts and pallet jacks far better than a thin roll coat.
Conductive and antimicrobial versions are available when a room has stricter rules. Each one is tested after cure so the numbers match what the spec sheet promised.

03 · SELF-LEVELING SYSTEM
A self-leveling pour shows every flaw it sits on, so the slab gets a close look before anything is mixed. Cracks are routed and filled, and spalled areas are rebuilt with epoxy mortar.
Moisture is tested with in-slab RH probes, since vapor pushing up from below can cause bubbles weeks later. If the readings run high, a moisture barrier primer goes down first to protect the finish.

04 · SELF-LEVELING SYSTEM
Homeowners pick self-leveling epoxy when they want a sleek, modern floor that looks poured rather than painted. The resin settles into a flat, glassy surface that suits basement living rooms, loft condos and home gyms.
Every basement slab gets a moisture reading first, and a vapor barrier primer goes down when the numbers call for it. Solid colors, subtle metallic tints and a satin or gloss finish are all shown on sample boards before the pour.

05 · SELF-LEVELING SYSTEM
Commercial spaces that want a clean, high-end look without grout lines often land on self-leveling epoxy. The seamless finish wipes clean in one pass, so clinics, salons and showrooms can keep floors spotless with a damp mop.
Pours are scheduled after hours or over a weekend so patients and customers never walk through a work zone. Most commercial rooms of 2,000 sq ft or less are open for foot traffic within 24 hours.

06 · SELF-LEVELING SYSTEM
Some older slabs are too uneven for any coating to look right, which shows up as dips, ridges and puddles. A cement-based self-leveling underlayment fills the low spots first and gives the epoxy a flat surface to flow across.
Knoxville Epoxy Floor Pros checks the slab with a 10-foot straightedge before and after the underlayment, so the final floor reads flat under bright lights. This step adds about a day to most projects and is quoted on its own line.
WHY PROPERTY OWNERS CHOOSE US
01
High and low spots are marked and corrected, so the finished floor reads flat under bright lights.
02
Grinders run with HEPA vacuums attached, which keeps the rest of the building clean while the slab is prepped.
03
Door thresholds and wall lines are troweled, so the pour stops cleanly without drips on trim or baseboards.
04
A crew lead comes back after a year to check the finish and buff out any light scuffs.
05
A crew lead certified as an ICRI Concrete Slab Moisture Testing Technician checks every slab before a coating system is chosen.
06
Every coating system carries a written limited warranty against peeling and delamination.
Most floors land between $6.50 and $12 per sq ft. A thicker pour, heavy crack repair or a conductive system pushes the price toward the higher end.
Most pours run 1/8 to 3/16 inch. Thicker builds are used where carts or light machinery roll across the floor every day.
It hides minor texture, but it follows the slab underneath. Larger cracks and dips have to be repaired first, or they show through the finished surface.
Yes. Lofts, basements and studios are common projects, and the seamless finish works well with radiant heat and modern decor.
The glossy finish can get slick with water on it. A fine aggregate can be mixed into the topcoat to add grip without losing much shine.
Light foot traffic is fine after 24 hours, and most furniture can return after 72 hours. Felt pads under chair legs help protect the gloss over time.

WHAT HAPPENS AFTER YOU CALL
01 Free on-site estimate
Usually booked within 2 business days of your call.
02 Itemized written quote
Grinding, repairs, materials and labor are listed line by line.
03 Quick start dates
Most installs begin within 2 weeks of signing.
04 Furniture moving and cleanup
Both included, so the space is ready to use when the crew leaves.
05 Local to East Tennessee
Serving Knox, Blount, Anderson and Loudon counties.
Get a FREE Quote
Rated #1 Epoxy Floor Installer in Knoxville, 2026