Epoxy Flooring Installation in Maryville, TN

Knoxville Epoxy Floor Pros has installed garage, basement and commercial epoxy floors in Maryville, TN since 2017, with more than 260 Blount County slabs finished by the same local crew. Every job starts with a moisture test and a diamond grind, which matters a lot during humid East Tennessee summers.

RECENT LOCAL PROJECTS

Recent Epoxy Floor Coating Projects in Maryville, TN

01

Polyaspartic Flake Garage Floor installed on Old Niles Ferry Rd, Maryville, TN 37801

A retired couple off Old Niles Ferry Road had a 1970s garage with peeling paint and a wide crack at the house step. Knoxville Epoxy Floor Pros ground off the paint, filled the crack and broadcast a tan, brown and gray flake. A clear polyaspartic topcoat let both cars back in within 24 hours. The couple now uses the extra space for a small workbench as well.

Turnaround: 1 day

Price: $2,850 (480 sq ft)

02

Metallic Epoxy Basement Floor installed on Montvale Rd, Maryville, TN 37803

This walkout basement off Montvale Road had stained carpet over a slab that stayed damp every spring. After a moisture test, the crew rolled on a vapor-blocking primer and poured a silver and charcoal metallic epoxy. A satin topcoat cuts glare in what is now a game room with a pool table. The room has stayed dry and comfortable through two wet springs since.

Turnaround: 3 days

Price: $4,900 (650 sq ft)

03

Chemical-Resistant Epoxy Floor installed at an auto repair shop on E Lamar Alexander Pkwy, Maryville, TN 37804

Brake fluid and coolant had soaked into the two lift bays at this East Lamar Alexander Parkway repair shop. The bays were shot-blasted, cracks around the lift posts were rebuilt and a gray epoxy with grit for traction went down. Splitting the job across two weekends kept the shop open every weekday. Yellow safety lines now mark each lift zone and the walkway to the office.

Turnaround: 4 days over 2 weekends

Price: $12,600 (1,800 sq ft)

WHAT WE OFFER

Concrete Floor Coating Services Across Maryville and Blount County

Several classic cars parked inside a garage

01

Epoxy Garage Floors

Most Maryville garage jobs use a flake system because it hides dust, grips well underfoot and shrugs off hot tire pickup. Each floor gets a full grind, a base coat, a broadcast of colored chips and a clear topcoat that wipes clean with a damp mop. It is the most requested floor in the older ranch homes scattered across Maryville. Samples are brought to every estimate so colors can be checked in real daylight before anything is ordered.

Spacious unfinished basement with exposed joists, support poles, and stairs

02

Basement Floor Coatings

Below-grade slabs need a coating that can handle moisture pushing up from the soil. A moisture test comes first, then a vapor-blocking primer when readings run high, followed by a solid color, quartz or metallic finish that makes the room feel finished. Clay soil around Pistol Creek can hold water for weeks after a storm, so this step matters here. A dehumidifier helps any basement coating last longer through humid East Tennessee summers.

A warehouse filled with lots of cars and trucks

03

One-Day Polyaspartic Floors

Polyaspartic cures much faster than standard epoxy, so many two-car garages are coated and ready for foot traffic the same evening. It also holds its color in direct sunlight, which helps garages that stay open through long summer afternoons. Newer subdivisions off Sevierville Road and Wildwood Road ask for this one-day option most often. Owners who work weekdays often book a Friday install so the garage is ready for the weekend.

a large machine in a large building

04

Auto Bay and Repair Shop Floors

Shops deal with oil, brake fluid, coolant and dropped tools every single day. A thicker epoxy base with a chemical-resistant topcoat stands up to that abuse, and painted safety lines can mark lift zones and walkways during the same visit. Repair shops around Washington Street and the Foothills Mall area usually book these over a weekend. Every commercial quote lists expected downtime in hours, so shop owners can plan around it with confidence.

a large warehouse filled with lots of shelves

05

Warehouse and Storage Floors

Pallet jacks and forklifts grind bare concrete into dust that settles on stock and shelving. Knoxville Epoxy Floor Pros coats storage floors around Maryville with high-build epoxy that resists abrasion and sweeps clean at the end of a shift. Storage buildings near McGhee Tyson Airport in neighboring Alcoa see exactly this kind of steady traffic. Larger floors are coated in sections over a few weekends so shipping and storage never stop.

barbell on rack

06

Home Gym and Workshop Floors

A garage gym needs a floor that handles dropped plates and sweat without staining. A workshop has to take sawdust, spilled finish and rolling toolboxes, so a thicker base coat and a textured topcoat are used for both, with mats added only where weights land. Plenty of garages near Maryville College now double as a home gym or woodshop. Light gray finishes brighten the space so small screws and parts are much easier to spot.

AFTER THE INSTALL

Finishes, Floor Care and Recoats for Maryville Floors

01

Flake, Metallic and Solid Color Finishes

Flake suits most garages, metallic gives basements and storefronts a polished look and solid colors work well in shops with safety lines. Knoxville Epoxy Floor Pros brings physical samples to every estimate so colors can be checked in the real light of the room. Chip blends can also be mixed to match brick, siding or cabinet colors. Physical samples make it easy to compare finishes side by side in the actual room.

02

Keeping the Floor Clean

A dust mop for grit and a damp mop with a pH-neutral cleaner handle most upkeep. Harsh acids, bleach and citrus degreasers are best skipped since they dull the topcoat over time, and a mat by the door catches grit tracked in during winter. Oil drips wipe right up with a paper towel. Oil drips and spilled paint wipe up easily when they are cleaned the same day.

03

Recoats and Repairs Later On

Even a tough floor picks up scuffs after years of cars, bikes and tools. A light sanding and a fresh clear topcoat bring the shine back, and chipped spots can be patched and blended without redoing the whole slab. Most recoats are done in a single day, so the garage is back in use by evening. Most owners book a fresh topcoat every 7 to 10 years to keep the floor looking new.

Schedule a Free On-Site Epoxy Floor Estimate in Maryville, TN

An installer from Knoxville Epoxy Floor Pros will measure the space, take a moisture reading and bring flake, quartz and metallic samples to homes and shops in Maryville, Alcoa and Rockford. We also install epoxy floors in nearby Powell, TN.

A line-item price is emailed the same day, and most garages are finished in just 1 day. Saturday estimate slots are open too, so call (555) 555-5555 or send the form to grab a time.

WHAT HAPPENS AFTER YOU CALL

What to Expect From Our Crew

01 Free on-site estimate

Usually booked within 2 business days of your call.

02 Itemized written quote

Grinding, repairs, materials and labor are listed line by line.

03 Quick start dates

Most installs begin within 2 weeks of signing.

04 Furniture moving and cleanup

Both included, so the space is ready to use when the crew leaves.

05 Local to East Tennessee

Serving Knox, Blount, Anderson and Loudon counties.

Get a FREE Quote

Rated #1 Epoxy Floor Installer in Knoxville, 2026