Knoxville Epoxy Floor Pros has installed 57 chemical-resistant epoxy flooring systems in labs, battery rooms and plating shops, many of them along the Pellissippi Parkway tech corridor and out in Karns. Standard epoxy softens under strong acids and solvents, so these jobs call for heavier resin systems built for spills that would ruin a garage coating.
A plant engineer or safety manager usually walks the floor with the crew first, and the chemical list drives every decision after that. Facilities in Corryton and Jefferson City have used that walkthrough to sort out which rooms need novolac and which can get by with a standard epoxy.

A furniture plant in Morristown charges its forklift batteries in a 1,200 sq ft room where acid drips had eaten pits into the bare slab. We ground out the damaged concrete, filled the pits with epoxy mortar and installed a novolac epoxy system with a 6-inch coved curb around the charging stations.
The forklifts were moved to a temporary charging area in the yard, so the night shift kept running.
Cost: $16,800 for 1,200 sq ft
Timeframe: 4 days

A research lab in Fort Sanders had vinyl tile lifting wherever solvents and cleaning acids had splashed near the fume hoods. Knoxville Epoxy Floor Pros removed the tile and adhesive from 850 sq ft, then installed a seamless novolac floor with an integral cove base that wraps up behind the benches.
Lab staff worked from a second floor suite for the week, and the benches went back in on day five.
Cost: $11,100 for 850 sq ft
Timeframe: 5 days

A specialty chemical plant in Loudon needed its drum storage area lined so any leak would stay inside the room until cleanup. The crew shot-blasted 2,600 sq ft, built 4-inch containment curbs and applied a novolac epoxy lining rated for the caustics and solvents stored there.
The drums were staged in a trailer during the job, and the area was back in use within a week.
Cost: $33,800 for 2,600 sq ft
Timeframe: 6 days
CHEMICAL-RESISTANT SYSTEMS WE INSTALL
WHY PLANT AND LAB MANAGERS CHOOSE US
01
Your safety data sheets are matched to resin test data before a quote is written, so the coating is picked for the real exposure.
02
Wet film gauges are used on every coat, which keeps the build even across the whole floor.
03
Curbs, ramps and coved edges are formed in the same resin, so there is no seam between floor and wall.
04
Staff get a short rundown on cleanup, neutralizers and what to avoid during the first week of cure.
05
Most projects are completed with minimal downtime, often between Sunday close and Tuesday prep, so you don't lose a busy weekend.
06
Every coating system carries a written limited warranty against peeling and delamination.
Most projects fall between $7 and $13 per sq ft. Novolac systems, containment curbs and heavy concrete repair push the price toward the top of that range.
Novolac is a type of epoxy resin with a denser chemical structure than standard epoxy. That extra density lets it stand up to concentrated acids and solvents that would stain or soften a regular coating.
A novolac system handles sulfuric acid spills from forklift batteries well, as long as spills get cleaned up in a reasonable time. A coved curb around the charging area keeps acid off the bare concrete.
Yes. Pitted or soft concrete is ground out until sound material is reached, then rebuilt with epoxy mortar before the new coating goes down.
Foot traffic is fine after about 48 hours, but full chemical resistance takes around 7 days. Keeping harsh chemicals off the floor during that first week makes a real difference.
Yes, it can. A sealed floor with curbs and coved edges holds spills inside the room, and the curb height is sized to the largest container stored there.

WHAT HAPPENS AFTER YOU CALL
01 Free on-site estimate
Usually booked within 2 business days of your call.
02 Itemized written quote
Grinding, repairs, materials and labor are listed line by line.
03 Quick start dates
Most installs begin within 2 weeks of signing.
04 Furniture moving and cleanup
Both included, so the space is ready to use when the crew leaves.
05 Local to East Tennessee
Serving Knox, Blount, Anderson and Loudon counties.
Get a FREE Quote
Rated #1 Epoxy Floor Installer in Knoxville, 2026