Epoxy Flooring Installation in Alcoa, TN

Knoxville Epoxy Floor Pros has spent 6 years coating garages, warehouses and shop floors in Alcoa, TN, with a dedicated 3-person commercial crew for jobs near the airport and along Alcoa Highway. Every free estimate comes with a moisture test, a crack check and color samples, so each floor is quoted on its real condition rather than a guess.

RECENT LOCAL PROJECTS

Epoxy Floor Projects Completed in Alcoa, TN

Three recent Alcoa jobs, from a family garage to a busy warehouse, each with the floor size, turnaround and final price.

01

Polyaspartic Garage Floor installed on Hunt Rd, Alcoa, TN 37701

A two-car garage off Hunt Road had a cracked slab and an old kit coating flaking off in long strips. Knoxville Epoxy Floor Pros ground it down to bare concrete, filled the cracks and broadcast a saddle tan flake under a clear polyaspartic topcoat. The owners parked both trucks inside the next morning, and they say the floor now cleans up with a leaf blower in about two minutes.

Turnaround: 1 day

Price: $2,950 (500 sq ft)

02

Warehouse Floor Coating installed on Louisville Rd, Alcoa, TN 37701

A small distribution warehouse on Louisville Road had pallet jack paths worn into the slab and fine dust settling on every shelf. The crew ground the floor, patched the worn lanes and rolled out a gray high-build epoxy with a urethane topcoat and bright yellow walk lines. Work ran over two weekends, so shipping never paused and no orders went out late.

Turnaround: 4 days over 2 weekends

Price: $11,200 (2,000 sq ft)

03

Metallic Epoxy Floor installed at a salon on Hall Rd, Alcoa, TN 37701

A hair salon on Hall Road wanted to replace stained laminate with a floor that looked high end and could handle dropped dye and hair spray. The old flooring came up, the slab was ground and patched, and a white and silver metallic epoxy went down under a chemical-resistant topcoat. The salon reopened after a long weekend, and clients still comment on the floor.

Turnaround: 3 days

Price: $6,400 (800 sq ft)

WHAT WE OFFER

Epoxy Floor Coating Services for Alcoa Homes and Businesses

Polyaspartic epoxy floor coating in Alcoa, TN by Knoxville Epoxy Floor Pros

Six services cover most of the floors Alcoa owners call about, from home garages to warehouse space near the airport.

01

Garage Floor Coatings

Garages in Springbrook and the newer neighborhoods off Wright Road usually get a flake system with a polyaspartic topcoat. It handles hot tires, road salt and dripping fluids, hides dust between cleanings and is often ready for cars the next day. Older garages get extra crack repair before any color goes down.

02

Basement Floor Coatings

Basements in Blount County can stay damp for weeks after long spring rains. A moisture test comes first, then a vapor-blocking primer when readings run high, followed by a solid color, quartz or metallic finish. The result is a dry, bright room that is easy to sweep and pleasant to spend time in.

03

Warehouse Floor Coatings

Warehouses and distribution space near McGhee Tyson Airport deal with forklifts, pallet jacks and constant foot traffic. High-build epoxy with a urethane topcoat resists abrasion and stays easy to sweep, and aisle lines and safety zones can be painted during the same install to keep crews organized.

04

Commercial and Retail Floors

Salons, offices, gyms and stores along Alcoa Highway need floors that look sharp and handle heavy daily cleaning. Knoxville Epoxy Floor Pros installs metallic, flake and solid color systems for these spaces, with nights and weekends available so doors can stay open while the work gets done.

05

Workshop and Hobby Floors

Home shops and hobby garages take sawdust, spilled finish, dropped tools and rolling carts. A thicker base coat with a textured topcoat stands up to that abuse, and light gray or tan colors brighten the room so small parts and screws are easier to spot on the floor.

06

Anti-Slip Finishes

Entries, ramps and wash areas need grip just as much as good looks. Aluminum oxide or polymer grit is mixed into the final coat, and texture samples are brought to every estimate so the right level of grip can be picked for each area of the floor.

AFTER THE INSTALL

Prep, Floor Care and Repairs in Alcoa

Good prep and simple upkeep are what keep a coated floor looking new for years.

01

Surface Prep and Moisture Testing

Knoxville Epoxy Floor Pros moisture tests and diamond grinds every Alcoa slab before any coating is mixed. Cracks, pits and spalled spots are filled and smoothed, and vacuums attached to each grinder keep dust out of the house or work area. This prep is what stops a coating from peeling a year later, so it is never skipped or rushed, even on a tight schedule.

02

Cleaning, Recoats and Touch-Ups

A dust mop and a damp mop with a pH-neutral cleaner handle most upkeep, while bleach, acids and citrus cleaners are best avoided since they dull the topcoat. After years of use, a light sanding and a fresh clear topcoat bring back the shine, and chipped spots can be patched and blended in without redoing the whole floor. Most Alcoa owners only need a recoat every 7 to 10 years.

What Happens on Install Day

Install day starts early, with the crew covering walls, doors and anything that stays in the room before grinding begins. Garages are usually cleared the evening before, and the crew can move shelves, bikes and tools if they are too heavy to shift alone. Most residential jobs finish before dinner on the last day. Pets and kids should stay off the floor until the crew gives the all clear.

Cure Times and Scheduling

Polyaspartic floors take light foot traffic within a few hours and cars within about a day, while standard epoxy needs closer to three days before parking. Warm, dry weeks in late spring and fall are the easiest for scheduling, though heaters and dehumidifiers keep winter and summer jobs on track around Alcoa. Winter jobs simply get a little more cure time built into the plan.

Aftercare and Follow-Up

A short care sheet is left behind after every job, covering cleaning products, cure times and what to avoid in the first week. Questions after the install are answered by the same crew lead who ran the job, and small touch-ups are handled quickly if a chip or scuff shows up later.

Schedule a Free Epoxy Floor Estimate in Alcoa, TN

An installer from Knoxville Epoxy Floor Pros will measure the floor, test for moisture and bring flake, metallic and anti-slip samples to homes and businesses in Alcoa, Maryville and Rockford. We also install epoxy floors in nearby Lenoir City, TN.

A line-item quote is emailed the same day, and commercial clients get downtime listed in hours. Call (555) 555-5555 or send the form to book a time, including Saturdays.

WHAT HAPPENS AFTER YOU CALL

What to Expect From Our Crew

01 Free on-site estimate

Usually booked within 2 business days of your call.

02 Itemized written quote

Grinding, repairs, materials and labor are listed line by line.

03 Quick start dates

Most installs begin within 2 weeks of signing.

04 Furniture moving and cleanup

Both included, so the space is ready to use when the crew leaves.

05 Local to East Tennessee

Serving Knox, Blount, Anderson and Loudon counties.

Get a FREE Quote

Rated #1 Epoxy Floor Installer in Knoxville, 2026